SILATERM WHITE 600
| Technical details | |
|---|---|
| The weight of the bag | 20 kg / 5kg |
| Grain | 0-0.6 mm |
| Processing time | 120 min. |
| Temperature of use | 600 °C |
| Packaging yield per m2 | Approximately 20-21 m² |
| Water consumption | 0,25–0,29 l / 1 of mixture |
| Maximum possible layer strength | 10 mm |
| Direct contact with fire | no |
| Direct contact with fire | hydraulic |
SILATERM MODEL
It is the most widely used fireplace plaster with a heat resistance of 200 °C and a grain size of 0–63 mm. This grain is visually very similar to the standard stucco widely used in today's interiors. The advantage of this stove plaster also lies in the fact that you can apply it in layers of up to 3 cm and modify (structure) it in other ways. Various inequalities can be leveled with it. It is applied with a stainless steel trowel, rolled with a felt trowel and structured with a foam trowel. Processing time is approx. 45 minutes. The plaster can be connected and repaired without visible visual adverse effects.
| Technical details | |
|---|---|
| The weight of the bag | 20 kg / 5kg |
| Grain | 0-0.6 mm |
| Processing time | 50 min. |
| Temperature of use | 200 °C |
| Packaging yield per m2 | About 16.5 m² |
| Water consumption | 0.3 l / 1 kg of mixture |
| Maximum possible layer strength | 50 mm |
| The possibility of connecting plaster / retouching | yes |
SILATERM FINISH
It is a designer very fine sandable stove plaster with a heat resistance of 200 °C and a grain size of 0-40 μm. It is applied with a smoothing spatula or trowel. It is sanded with a fine grid on plasterboard or with sandpaper. Processing time is 2-3 hours. The plaster can be connected and repaired without visible visual adverse effects.
| Technical details | |
|---|---|
| The weight of the bag | 16 kg / 5kg |
| Grain | 0-0.1 mm |
| Processing time | 120 min. |
| Temperature of use | 200 °C |
| Packaging yield per m2 | Approximately 16 m² |
| Water consumption | 0.3-0.35 l / 1 kg of mixture |
| Maximum possible layer strength | 1 mm |
| The possibility of connecting plaster / retouching | yes |
SILATERM ST - H
It is a rough stove plaster with a grain size of 1.5 mm, resistant to 200°C. It is applied with a smoothing trowel. It is best rolled with a plastic trowel. The processing time of the plaster lasts 90 minutes. Plaster cannot be connected. The entire applied surface must always be finished.
This plaster is the only one that is also suitable for exterior use.
| Technical details | |
|---|---|
| The weight of the bag | 20 kg / 5kg |
| Grain | 0-0.1 mm |
| Processing time | About 90 min. |
| Temperature of use | 200 °C |
| Packaging yield per m2 | About 7,2 m² |
| Water consumption | 0.21-0.23 l / 1 kg of mixture |
| The possibility of connecting plaster / retouching | no |
SILATERM KAMMAL 30
It is a purely hydraulic stove mortar intended for direct contact with fire. Heat resistance is 1100 °C. Processing time 20 min. The grain size of the mortar is 0-0.6 mm with a fine grain curve. It is recommended for prefabrication
and the masonry of the second walls, mainly from tiles. Furthermore, for masonry of fireplaces and chimneys ceramic strokes. Mortar is very strong. It is the most suitable mortar for outdoor applications. The bag contains 5 kg or 20 kg of dry mixture.
| Technical details | |
|---|---|
| The weight of the bag | 5 kg / 20 kg |
| Grain | 0-0.6 mm |
| Processing time | About 20 minutes. |
| Temperature of use | 1100 °C |
| Water consumption | 0.25 l / 1 kg of mixture |
| Direct contact with fire | yes |
| Direct contact with fire | hydraulic |
HAFTA
It is a ceramic-hydraulic mortar for direct contact with fire. Crochet resists 1,100 °C. Processing time 20–30 min. Mortar grain size 0-1 mm with a finer grain curve. It can be used as a supporting layer for kamnaří pearl, but it is a dark background. It is recommended for prefabrication and masonry of second skins, mainly from tiles. Furthermore, for masonry of fireplaces and chimneys ceramic strokes. The bag contains 20 kg of dry mixture.
| Technical details | |
|---|---|
| The weight of the bag | 20 kg |
| Grain | 0-1 mm |
| Processing time | 30 minutes. |
| Temperature of use | 1000 °C |
| Water consumption | 0.25 l / 1 kg of mixture |
| Maximum possible layer strength | 30mm |
| Direct contact with fire | yes |
| Direct contact with fire | Ceramic-hydraulic |
DOUBLETERM
DOUBLETERM is a highly sophisticated chimney plaster with a hydraulic bond and high heat resistance. Withstands high temperatures up to 200°C. It is suitable for interiors and exteriors. It can be connected without creating a visible transition, which greatly facilitates repairs. It is also suitable for repairing old historical plaster structures. DOUBLETERM contains a mixture of several types of fibers, which in many cases can even replace mesh. Nevertheless, we recommend using SILATERM stove pearl. Due to its composition, DOUBLETERM is used as a carrier layer for pearl and a visual layer in one. Surface irregularities can be easily compared with it. It can withstand the formation of cracks and cracking in a layer of up to 50 mm. You can also use DOUBLETERM as a modeling plaster. The grain size and grain curve of 0 to 0.5 mm is adjusted so that the surface structure after processing meets the requirements of most customers and does not differ from the standard stucco and plaster commonly used in modern interiors. Different processing methods can create a grainy or perfectly smooth surface (more in the processing chapter). The surface is very strong / abrasion resistant. For enough time to create
perfect surface, the processing time is set to 120 min. DOUBLETERM was designed to be as user-friendly as possible. It is now easier to create a quality finish on the fireplace / stove.
| Technical details | |
|---|---|
| Appearance | white powder mixture |
| Grain | 0-0.5 mm |
| Amount of mixing water | 0,34-0,38 l per 1 kg |
| Processing time | 120 min. |
| Consumption in the thickness of 1 mm layer | 1.15kg/m2 |
| Packed in a paper bag with a polyethylene insert | 20 kg / 5 kgmm |
Preparation of documents:
The base must always be load-bearing and, above all, solid. No efflorescence, sufficiently matured and free from grease, dust and dirt. The substrate must not have a temperature below 5 °C. Do not apply DOUBLETERM at such a temperature. More absorbent substrates, e.g. calcium silicates and very porous fireclays, are recommended to be penetrated with a special proven penetration for fireplaces and stoves SILAPEN. Carry out the flooding test only after the surface has completely dried. The first flood must be gradual and sensitive.
Processing:
Pour the dry mixture into the bucket and mix it dry first. Always use potable water only (0.34-0.38 l per 1 kg of mixture). Mix thoroughly for 3 to 5 minutes on low speed. Let stand for 5 minutes and mix again. Do not add more water while mixing. The minimum temperature of the substrate and the mixture is 5 °C / maximum 30 °C. Pot life is approximately 120 minutes depending on temperature and humidity. Apply DOUBLETERM as needed in a thickness of 1 to 50 mm with a spatula or a solid, inflexible plastic or stainless steel trowel. After setting the surface, swirl the surface with a felt for a grainy look. For a perfectly smooth surface, tighten the rotten plaster with stainless steel
with a trowel.
CANARIES PERLINKA SILATERM
SILATERM fireplace pearl stands out for its non-flammability and heat resistance of 550 °C. It also has a high resistance to thermal shocks. It is also resistant to acidic and alkaline environments, which is a very important property for stove mortars and adhesives. The roll is 50 x 1.1 bm (55 m2).
| Technical details | |
|---|---|
| Heat resistance | 550 °C |
| Eye size | 3 x 3.5 mm |
| Direct contact with fire | no |
| Outdoor use | yes |
SILATERM UNIVERSAL SEALANT
It is used for gluing calcium silicates, fireclays, Liapor and refractory concrete fittings, chimney flues, radiant linings, insulating boards. All heater repairs are carried out with it. It has a resistance of 1,260 °C. The putty is intended for direct contact with fire. It has a chemical bond. Packaging bucket 6 kg. Mix the separated water glass well before use. The putty is ready to use.
| Technical details | |
|---|---|
| The weight of the bucket | 6 kg / 2 kg |
| Grain | 0.03 mm |
| Temperature of use | 1260 °C |
| Direct contact with fire | yes |
| Direct contact with fire | Chemical / ceramic |
| Outdoor use | no |
JOINTING COMPOUNDS
| Code | Name |
|---|---|
| Spbl | SPARAL – Chimney grout WHITE GLOSSY 90002 – 2 kg |
| Spbm | SPARAL – Chimney grout WHITE MATT 90901 – 2 kg |
| Spkl | SPARAL – Stove jointing compound CREAM GLOSSY 31909 – 2 kg |
| Spskl | SPARAL – Chimney jointing compound IVORY GLOSSY 92300 – 2 kg |
| Spskm | SPARAL – Chimney jointing compound IVORY MATT 92360 – 2 kg |
| Spp | SPARAL – Fireplace jointing compound PÍSKOVEC 32300 – 2 kg |
| Spt | SPARAL – Chimney grout TERAKOTA 69602 – 2 kg |
| Spc | SPARAL – Fireplace jointing compound RED CARMEN 72701 – 2 kg |
| Spch | SPARAL – Chimney grout CHERRY 75705 – 2 kg |
| Spchi | SPARAL – Chimney grout CHILLI 76873 – 2 kg |
| Spc | SPARAL – Stove jointing compound RED SCARLET 77900 – 2 kg |
| Sphs | SPARAL – Chimney grout BROWN SAHARA 65600 – 2 kg |
| Sphsr | SPARAL – Stove jointing compound BROWN DEER 67300 – 2 kg |
| Sphk | SPARAL – Chimney jointing compound BROWN CHESTNUT 60002 – 2 kg |
| Sphb | SPARAL – Chimney grout BROWN BUREL 69600 – 2 kg |
| Spc | SPARAL – Stove jointing compound CHOCOLATE 68692 – 2 kg |
| Spzm | SPARAL – Stove jointing compound GREEN HONEY 12302 – 2 kg |
| Spzzo | SPARAL – Chimney jointing compound ZELENA ŠUMAVSKÁ 19301 – 2 kg |
| Spzo | SPARAL – Chimney jointing compound GREEN SPARAL – Chimney jointing compound GREEN OLIVE 18300 – 2 kg |
| Sppm | SPARAL – Stove jointing compound FORGOTTEN MAT 21203 – 2 kg |
| Sppl | SPARAL – Stove jointing compound GLOSSY FORGOTTEN 22202 – 2 kg |
| Spmn | SPARAL – Chimney jointing compound BLUE BLUE 21205 – 2 kg |
| Spmc | SPARAL – Stove jointing compound IMPERIAL BLUE 29200 – 2 kg |
| Spmzj | SPARAL – Chimney grout BLUE GREEN LIGHT 25201 – 2 kg |
| Spčm | SPARAL – Stove jointing compound BLACK MATTE 49400 – 2 kg |